Category Archives: Uncategorized

Can I Resurface My Asphalt Driveway?

Asphalt Pavement Being Resurfaced.

Can I resurface my asphalt driveway?

If you’ve noticed some cracks or other damage like holes to your driveway, you may be wondering how to repair them. While a few cracks can be repaired with crack sealant, if the cracking is extensive, however, asphalt resurfacing may be the best option. This is also a good option if there are low spots in the asphalt to prevent standing water and reduce flooding risks. What is asphalt resurfacing? This is a middle road between minor repairs and full replacement. With a resurfacing, the drive and foundations isn’t dug up. You may ask, “Can you pour new asphalt over old asphalt?” This is exactly what resurfacing is: new asphalt is poured over the old. If the driveway damage isn’t severe, this is an affordable option to replacement. 

When you have a cracked and damaged drive and need professionals for asphalt resurfacing in Austin, TX, the team to turn to is ATX Asphalt Paving. We provide a full range of residential and commercial paving options. Give us a call at 512-646-6069 and find out how we can help you or schedule a service.

Should I resurface or replace my asphalt driveway?

While a few cracks can be repaired easily, if your drive is extensively cracked, however, you will have to decide between asphalt resurfacing or replacement. There are many advantages of resurfacing over replacement as outlined below.

Asphalt resurfacing vs replacement

  • Resurfacing is less expensive than replacement.
  • Resurface when the drive is otherwise sound.
  • Resurfacing is great for small scale enhancement and repair.
  • Resurfacing evens out the surface improving safety for pedestrian traffic.
  • The existing asphalt must be a minimum thickness of 1 ½ inches to resurface
  • If the drive is older than 15 years, it’s probably better to replace it.
  • When the drive is no longer structurally sound no matter the age, replace it.
  • If cracks appear over more than ⅓ of the surface, replace it.
  • Asphalt resurfacing is not recommended over concrete.

Resurfacing an asphalt driveway is a fairly simple, inexpensive process. The additional layers of asphalt will repair cracks and fill in holes, and give your drive a great new appearance. It can be done as long as the base layer is still structurally sound. If it is not sound, the resurfacing can do more harm than good. Before resurfacing, all necessary repairs need to be made and debris should be removed. Risers may need to be placed around objects like manhole covers as compensation for the new height of the asphalt.

How long does an asphalt overlay last?

Asphalt overlay or asphalt resurfacing adds fresh layers of asphalt over your current drive. It’s used as a way to repair cracks and holes or to improve its appearance. It will also even out the surface. Uneven surfaces can affect pedestrian traffic and safety and decrease the risk of flooding in low lying areas. You can resurface drives or even whole parking lots. One of the advantages of resurfacing is that it will add about 10 to 15 years to your drive’s life. If you replace the drive, the typical lifespan for a new asphalt drive is 15 to 25 years.

How much does it cost to resurface blacktop?

The average cost of asphalt resurfacing ranges from $980 to $3,485, but estimates can range from $250 to $6,000. Costs will vary depending on the amount of damage to the asphalt. Minor repairs like repairing potholes or cracks can range from $100 to $300. A major repair can cost $3,000 or more. A 500-square foot area in general will cost about $1,000 to $1,300 to resurface.

Cracks and potholes need to be repaired as soon as possible as the damage can affect the drive’s overall structure. Other problems can occur like poor drainage. When repairs are made, professionals like those at ATX Asphalt Paving generally charge by the square foot. On average asphalt costs between $1 and $3 per square foot to fix a small crack, whereas a pothole will cost about $2 to $4 per square foot. 

Additional aspects that could affect the cost include the slope of the surface and the ease in which a truck can get access to the job site. Any grading will cost on average about $1.50 per square foot. If there are drains or manholes, they will to be treated and in some cases you may need to get permits from your city or county. Permit fees can run anywhere between $10 to $200 or more.

An Asphalt Drive Gets Resurfaced.

Asphalt resurfacing near me

Do you have a relatively new asphalt drive? If the surface has cracks or holes in it you may want to consider asphalt resurfacing in Austin, TX. ATX Asphalt Paving has the expert professionals to manage any paving service you need. We offer a full range of paving services. Find out how we can help or schedule an appointment by calling 512-646-6069.

How do I repair a big crack in my driveway?

grass growing in the cracks of a driveway

Damaged driveway problems

If anything can take away from a home’s curb appeal, other than a dirty roof, siding, or unkempt lawn, it would be a chipped and cracked asphalt driveway. A driveway with cracks here and there can give a driveway a little charm, but when the cracks get large enough that your two-year-old grandson can “dive in”, that is at the point of ridiculous. Fortunately, there are companies that do asphalt driveway crack repair and can make your driveway look complete and new again. 

With the ground here in Texas shifting every day, it is impossible to keep an asphalt driveway in solid condition, and that is just one of many driveway crack causes. The shifting ground in Texas can play havoc on plumbing that runs underground, bursting pipes and clogging the septic systems. Fortunately, there are companies that can make repairs with driveway crack and joint filler and get rid of those cracks and holes that are pulling from your home’s curb appeal.

What causes asphalt to crack?

Before asphalt driveway crack repairs can be properly made, a contractor would first need to determine what caused it distressed that resulted in cracking. Common types of distress include cracking, disintegration, distortion, skidding hazards, and surface treatment distress. Within each of those causes are causes, which we are going to briefly discuss here.

  • Cracking –  Asphalt can experience various types of cracks and how to repair each type of crack is based on the type of crack. internal
  • Fatigue – Fatigue cracking, aka alligator cracking, is deterioration caused by loads on a weak base course or subgrade, pavement too thin, overweight loads, or a combination of all.
  • Block – Block cracking is a series of large rectangular cracks, typically 1 foot or bigger, on asphalt pavement and will cover a large area. They can occur without any traffic loads and is caused by the asphalt shrinking due to temperature fluctuating.
  • Edge – Edge cracks run lengthwise within 1 to 2 feet of the exterior most edge. These cracks are caused when the edge isn’t supported.
  • Longitudinal – Longitudinal cracks are parallel of the centerline and caused by one of the following, none of which are related to loads: Poorly constructed joints; Shrunken asphalt layer; Cracks reflecting from underlying layer; Improper paver operation.
  • Transverse – Transverse cracks are not related to loads and can occur perpendicular to the pavement’s centerline and is caused by the asphalt shrinking or reflection of an existing crack. They are not load-related.
  • Reflection – Reflection cracks form over cracks or joints in a concrete pavement or in deteriorated asphalt overlay and is caused by the old pavement moving.
  • Slippage – Slippage cracks are crescent-shaped cracks formed because the asphalt mix was low-strength or didn’t bond with pavement layers which causes cracks when vehicles brake or turn.

  • Distortion – Distortions is caused by instability or weak asphalt mix, the base, and/or subgrade layers, all of which can result in depressions, patch failures, rutting, shoving, and swelling.
  • Rutting – Rutting is the result of surface depression in the wheel path and be caused by consolidation or deformation of pavement layers or subgrade as the result of insufficient pavement thickness, absence of compaction, and weak asphalt mixture.
  • Shoving- Shoving forms from pavement ripples and is a characteristic shape that is referred to as wash-boarding. This occurs where there is severe horizontal stress like at intersections and is caused by either excess asphalt, fine or rounded aggregate, soft asphalt, or weak granular base.
  • Depressions- Depressions are localized low spots caused by settlement or poor construction techniques.
  • Upheaval- Upheaval is a localized movement upward in pavement and is caused by the subgrade swelling, typically from the ground freezing and thawing.
  • Patch Failed – Patched pavement can become distressed when it deteriorates because of poor compaction, poor materials or the surrounding pavement is poor.
  • Disintegration
    Disintegration happens when the pavement breaks into small pieces then disperse with traffic over time, resulting in potholes and raveling.
  • Raveling- Raveling is when the aggregate particles wear away from the asphalt, showing the asphalt has hardened or they used a poor mixture and occurs with heavy traffic.
  • Potholes- Potholes are caused the disintegration of the pavement, typically caused by continued deterioration and distress as the result of poor mixtures of the base and weak spots.

Additional causes that may require asphalt driveway crack repairs are skidding hazards surface water causes that on the pavement, polished aggregates, or surplus of asphalt and/or other lubricants on the surface. Or surface treatment distress is the loss of aggregate.

How long does it take for asphalt to crack?

The question should be how long it takes asphalt to dry, and the answer is 1 year. It is 12 months before asphalt is fully cured and hardened. At that point, the cracking can begin if any of the points listed above are in place.

What causes Alligatoring in asphalt?

Alligatoring is the same as fatigue as we described earlier and is the deterioration caused by one or all the following:

  • Weak base course or subgrade
  • Pavement too thin
  • Overweight loads

What’s the best asphalt crack filler?

There are several brands of driveway crack filling products on the market and the contractor you choose to use for asphalt driveway crack repairs can explain the differences and why they recommend using any specific one. Among those on the market are:

  • EpoxyShield by Rust-Oleum
  • Flomix by Roklin Systems Inc.
  • Black Top Filler by Sakrete Of North America.
patch on an asphalt driveway

 How do you fix a large hole in the asphalt driveway?

To be certain you do properly your asphalt driveway crack repairs, choosing an experienced, qualified professional is recommended. This way, you have a guarantee and problem the repair didn’t stick, you will have recourse.  However, if you choose to do asphalt driveway crack repairs yourself, the following steps will give you guidance:

  • With a circular saw and an abrasive masonry blade, cut around the hole to create a clean edge.
  • Remove loose asphalt and soil with a shovel from the area.
  • Install a board around the edge to hold the new asphalt.
  • Pour crushed gravel or limestone in the hole as a base then tamp down.
  • Fill the hole with asphalt repair material and tamp down.
  • Cover with plywood and pack down by driving over it to compact

We value our asphalt driveways when the weather is nasty and wet, it makes getting to our home from the roadways easier and nicer. It is a worthwhile investment to make for a home and having it asphalt driveway crack repairs made is part of that ROI and upkeep. For your asphalt driveway crack repair in Austin, TX, dial 512-646-6069 for ATX Asphalt Paving.

Can you use decomposed granite for a driveway?

decomposed granite material

What is decomposed granite?

Before we answer that question and several others on this subject, let’s clarify what decomposed granite is exactly.  We classify it as a rock that is originated from granite and has weathered to where the granite readily breaks into smaller, weaker pieces of rock.

Sometimes decomposed granite becomes so fine over time, it is almost like sand. Because it is loose, decomposed granite has excellent drainage, which is why it is commonly used for gardens, landscaping mulch, play areas, and sports courts. Using decomposed granite for driveway, patios, or walkways for the same reason and because it is inexpensive.  

How long does decomposed granite last?

Decomposed granite is an ideal paving material for driveways, paths, walkways and other certain areas. It has a more natural look, comes in several colors, and is inexpensive when compared to concrete. How long decomposed granite last and how much it costs will depend on how and where it is used.

Decomposed granite is made of aggregated granite that is the consistency of sand and as big as 1/4″, which when compared to other materials, is a fine texture. It is because of that fine texture, it can easily wash away, but when applied properly, it has a longer lifespan than decomposed granite without stabilizer because it will be stabilized and less likely to erode. Experts recommend installing it with a slight slope will give it an average lifespan of 7 to 10 years.

Does decomposed granite need to be compacted?

Yes, and you must use a road base first, compacting them both as you apply.  Expert contractors recommend applying and compact several inches of road base so that is it hard, then lay the decomposed granite two inches thick and compact it. If you mix a hardener with the decomposed granite, apply half-inch at a time, compacting it. You want the decomposed granite to be slightly wet and do not apply it too thickly or it doesn’t harden well. 

Packing or tamping decomposed granite will help it settle to a denser substance as opposed to leaving it loosely laid. This makes for a firmer driveway, path, or patio surface. If you are adding a decomposed granite over a substrate of gravel, dampen with water prior to compacting it.

If you’re using decomposed granite on a small job, you can pack it down with a hand tamper. You do this with a flat, heavy piece of metal on the end of a long handle. Holding the end of the handle, bash the decomposed granite straight down repeatedly, adding more decomposed granite as you compact it to maintain a filled area. When you have achieved a firm and a hard surface, you are done.

Does decomposed granite get hard?

Decomposed granite is ¼” or smaller aggregate of granite, therefore, it is not a loose material, which makes it perfect for areas that need drainage, like a playground and sports areas. Adding a hardener to it and compacted both the road base and the decomposed granite as described above, it will become hard somewhat, but not as hard as concrete.

Does decomposed granite stop weeds?

Decomposed granite will not prevent weeds from growing in the landscaping, even when using a fabric material first. In fact, it has been known to increase weed growth. The most effective way to control weed growth is to apply an herbicide before laying the fabric and decomposed granite and refresh it as instructed on the label.

granite driveway to a house

Is decomposed granite safe for dogs?

Decomposed Granite is safe or pets because the fine texture is soft and stable. It washes off well in potty areas, making cleanup easier. Decomposed granite may be considered safer than solid cement because it is breathing and not as hot to their paw pads.

Decomposed granite and flagstone work well together in patio areas. The natural beauty of flagstone provides an elegant, sophisticated look while the decomposed granite sturdies the flagstone, eliminating the need for mortar. This is a popular and inexpensive way to design a patio and will last for several years of enjoyment.

Tree roots, rain, or melting snow is about the only natural enemy of decomposed granite. If you are considering installing decomposed granite for your patio, take into consideration the climate where you live. Decomposed granite works great in places like desert areas where the rainfall is minimal to none. If you live where there is more rainfall, it can erode faster, and it becomes muddy and mushy, especially if you do not use a stabilizer with it.

Loose decomposed granite shouldn’t be used right around the house where it can be tracked in easily either, regardless of the climate where you live. Create a brick inlay for your decomposed granite addition to give it color and detail touch that makes it pop. For areas where you’ll be using it as a walkway path, adding a stabilizer will strengthen it and softer. For your decomposed granite driveway in Austin, TX, dial 512-646-6069 for ATX Asphalt Paving!

How Much Does it Cost to Put In a Driveway?

Driveway Installation in Process

How Much Does it Cost to Put In a Driveway?

When determining the best material for your driveway, it’s important to consider the most popular choices: concrete and asphalt. As far as composition is concerned, asphalt and concrete both have a gravel base. Both asphalt and concrete are made with stone and sand, and the primary difference is the adhesive materials. According to recent estimates, it costs approximately $7,400 to install a concrete driveway. By comparison, asphalt driveways can cost between $2,300 and $10,300

Which is Cheaper Concrete or Asphalt Driveway?

Generally speaking, asphalt is much cheaper to install than concrete. According to recent estimates, the cost per square foot for asphalt alternates between approximately $2.50 to $4.00. Because there are fluctuations in crude oil prices, asphalt prices will also rise and fall correspondingly. In contrast, concrete can run between four to six dollars per square foot for basic installation. If you happen to have a few finishing details for your concrete driveway installation, you will have to pay according to the extra labor costs. 

What is the Cheapest Type of Driveway?

There is a wide selection of materials that you can select for your driveway, but one of the cheapest is gravel. Gravel is cheaper to install than asphalt, concrete, and paving stones. At the end of the day, your aesthetic vision and your budget will determine the best choice for your driveway. While you are factoring in other improvements to your home, your roof is an important consideration. What is the current condition of your roof? If you need a residential roof replacement, now is the time to secure a reputable and respectable roofer.

How Much Does it Cost to Put in a Driveway?

Driveway installation can be a costly endeavor. According to a national website engineered to collect data about driveway installation costs, the average is less than ten thousand dollars. In fact, the cost range for driveway installation is approximately $5 to $7 dollars per square foot and between $6,275 and $8,500 for the entirety of the work.

Is 2 Inches of Asphalt Enough for a Driveway?

Usually, for a residential driveway, the granular base aggregate is approximately six to eight inches. For commercial applications, the granular base differs, though it is usually eight inches. On top of the granular layer, residential driveways require two to three inches of asphalt, while commercial driveways require three inches of asphalt. 

Driveway Installation How To

When it comes to your gravel driveway installation, it pays to know the process. If you happen to have a commercial driver’s license, you can complete the entire project without any outside assistance. Please review the following list to find out more. 

  • Measure your driveway. This first step is the most crucial. It is important to know your driveway’s approximate length and width. 
  • Calculate your aggregate requirements. If you are building your driveway from scratch, you will require approximately two layers of aggregate. This aggregate will be composed of a finer lower layer and a coarser upper layer. 
  • Discover your aggregate options. The color, quality, and composition are all important considerations. The factor that will most impact your budget is the cost.
  • Delivery or Pickup? Unless you have a commercial driver’s license, you will need to contact a company that can deliver your driveway materials.
  • Grass and vegetation will need to be removed. You will need to mark out space for your driveway and remove all vegetation. A soil rake is recommended.
  • The ground will need to be leveled. On harder or more difficult surfaces, a power leveler may be necessary.
  • Make an appointment. Allow enough time for your gravel dropoff to spend a significant amount of time addressing the various materials. If the only time you can schedule the dropoff is during the weekend, extra costs may be involved.
  • Spread the aggregate accordingly. According to the specifications of your driveway, spread out the material.
  • Install drainage. This is very important. If your driveway is deeply sloped or if it close to your home, installing drainage will allow you to enjoy your driveway longer and experience more effectiveness. A basic French drain system could benefit you.
  • Spread the gravel. While there will need to be periodic maintenance, a good gravel installation will need less help. Make sure you research this process properly before embarking on this endeavor.

Driveway Installation Contractors Near Me

In order to find a reputable driveway installation contractor, make sure to consult friends and neighbors to ask for a recommendation. Perform a background check on the company or contractor by using the internet. It’s never been more important to investigate your contractors to ensure that you are spending your money wisely. 

Radiant Driveway Installation

Radiant driveways are essentially heated driveways. These driveways are especially desirable in northern areas of the country where snow and ice can hamper driving conditions. In order to receive a customized quote for your radiant driveway, please be sure to call several reputable paving companies for a quote.

Your Driveway Installation Is Important

Driveway Drain Installation Near Me

If your driveway is prone to flooding, the responsible thing to do is contact a local, respectable driveway drain company. Many paving companies offer this service. Whether you would like French drains or a different solution, your driveway stands to benefit from appropriate drainage.

Do you have a driveway installation on your agenda? Our staff at ATX Asphalt Paving are ready to take your phone call at 512-646-6069. Receive an accurate estimate for your driveway installation in Austin, TX!

How Do You Fix Crumbling Asphalt Driveway?

Contractor Working on Asphalt Patch

Asphalt Patch for Driveway

No wants to see or experience potholes when they are driving. That is especially true for your own driveway. There probably is not much worse than finding a damaging hole or crack in your own driveway. If and when that happens, it can feel like there isn’t much you can do. Filling it with more asphalt or concrete won’t do much. Ignoring it will only make the problem worse. So what do you do? You rely on expert contractors, like those with ATX Asphalt Paving. Reliable contractors can use high-quality, professional-grade asphalt patch and crack fillers to repair a damaged driveway. What they use isn’t the stuff you buy at the store. It’s a quality product that is used in conjunction with a reliable process that can expertly repair your driveway. The reason you don’t want to rely on those temporary patches from the store is that they are temporary. They won’t provide a reliable and lasting fix. You’ll more than likely find the hole growing larger or becoming more of a problem. Rather than risk doing more damage to your driveway, rely on ATX Asphalt Paving to help with any driveway or pathway need you may have. Contact us today at 512-646-6069 to make an appointment for an asphalt patch in Austin, TX.

Starting Asphalt Patch and Paving Service

Steps to Patch an Asphalt Driveway

Asphalt repair and general driveway contracting can quickly become complicated processes. Depending on the extent of the damage, you may be able to get away with an asphalt patch and crack filler temporarily. These fillers are good to prevent further damage from occurring, but they won’t fix the ultimate problem. For that, you may need to rely on an asphalt patch contractor. A reliable contractor will go through these steps to ensure your asphalt driveway or pathway is properly repaired.

  • Bigger Hole: The first step to repair a hole or crack in the asphalt is to actually make it bigger. Contractors will bring their own asphalt patch equipment, like a circular saw that will cut out a larger hole, creating a clean edge. 
  • Clean and Dry: Once the hole is bigger, the contractor will clean out any debris, dirt and other items. If it has been raining, they may need to wait a little while to let the area dry before continuing. 
  • Base It: As soon as everything is dry, the hole needs to be filled with a base of some sort. This is typically accomplished with limestone or gravel. If the damage is near the edge of your driveway, the contractor will also install a plywood board to hold the asphalt in place while it dries. 
  • Fill to Patch: The last step is to fill the entire area with an asphalt compound. To ensure it does completely set, they will tamp it down. Possibly even placing a piece of plywood over the area and driving over it to be completely sure it is set. 

Patching an asphalt driveway or pathway and get complicated very quickly. That’s why it’s so highly recommended to rely on experts when you can. Just like you’d rely on experts when you wanted a metal roof installation. For reliable asphalt patch contractors in your area, look no further than ATX Asphalt Paving. With years of quality experience, they can help you with just about anything. 

Frequently Asked Questions

  • What is asphalt patching?
    • It is the process of using a temporary asphalt compound to patch or fill a hole in a sidewalk, driveway or other pathway. Patching is usually only a temporary fix and shouldn’t be used as a way to permanently fix high-traffic areas. 
  • Can you put new asphalt over old asphalt?
    • Technically you can, if the area you are covering isn’t too badly damaged. Otherwise, adding asphalt over an already dented area of asphalt will just result in the new layer also becoming dented. 
  • How do you fix a hole in an asphalt driveway?
    • Patching a hole is a bit of a complicated process. You’ll actually need to cut out a larger hole to provide a clean edge. Then you’ll clean everything, fill the hole with limestone or asphalt, tamp it down, then cover it with the patch material, tamp that down, and then let it set. 
  • Can you cold patch asphalt in the rain? 
    • It is highly discouraged to attempt to fix or patch an asphalt driveway during the rain. There are oils in the asphalt compound that do repel water, but if you’re working on this in the rain, there will be unintended side-effects. Many of which can cause unwanted results. 
  • Should I resurface or replace my asphalt driveway?
    • If the underlying base of your driveway isn’t damaged, you can actually put off replacing the whole thing for about 8-15 years. Which means if the surface layer is damaged, you will probably be able to get away with resurfacing.
Completed Asphalt Patch Service

Schedule an Appointment With Us Today!

For reliable, trusted, and honest paving in your area, look no further than ATX Asphalt Paving. We can help with just about anything and that includes an asphalt patch in Austin, TX. Connect with us today by calling 512-646-6069 for an appointment.

What Kind of Gravel is Best for Driveways?

Gravel Comes in Various Grades for Paving.

How much does it cost to grade and gravel a driveway?

Costs will vary when grading a driveway depending on the size and slope of the driveway. What materials you choose when installing the driveway will also affect the cost. Usually one of the least expensive materials used for a driveway is gravel. And, as with grading a driveway, the costs to gravel a driveway will vary depending on the size of the driveway and the costs of gravel where you live. For the Austin, TX area, gravel or crushed stone costs on average about $1.33 per square foot. 

When you are looking for affordable driveway grading in Austin, TX make sure to rely on the professionals at ATX Asphalt Paving. Give us a call at 512-646-6069.

While we specialize in asphalt and gravel driveways, when you have an aging roof with asphalt shingles, you would need to find an experienced roofing contractor for a roof replacement

What are the grades of gravel?

Gravel or crushed stone comes in a variety of grades. The grades are based on size. The grade you choose will depend on what you are using it for. Applications for gravel range from filling spaces to paving and serving as a base material for concrete. Here is a list of gravel grades and potential uses.

Grades of gravel

  • #1: This is the largest crushed stone of about 2 to 4 inches in size and is useful for large projects or filling large holes.
  • #3: The stone is between ½-inch to 3 inches and perfect for railroad projects and those requiring drainage
  • #5: This is stone that is 1 inch or smaller and often used for road or paver base.
  • #8: Stone of between ⅜ inch and ½ inch that is commonly used for concrete mixes.
  • #10: This size is known as screening or dust and is used to create pavers or concrete blocks.
  • #57: Crushed stone that is ¾ inch or smaller and used for concrete mix, landscaping or drainage.
  • #67: This is crushed stone ¾ inch or smaller used for road and slab base or as fill.

Is a gravel driveway cheaper than concrete?

For the most part, gravel driveways are cheaper to build than concrete. For the Austin, TX area, gravel costs on average $1.33 per square foot, whereas concrete costs on average about $4.91 per square foot. Costs will vary from location to location. While gravel may be cheaper, it may require more maintenance and you may experience issues with rutting.

What is the maximum grade for a driveway?

When grading a driveway, the maximum grade  ideal for drainage will vary by location. In a hilly area steeper slopes may be required, whereas flatter areas may need lower slopes. Climate will also affect the slope. If you live in an area that gets a large amount of ice and snow, flatter grades will be required. In general, though, the maximum grade you want for a driveway is about 25%, or about 25 feet of rise over 100 feet.

How wide is normal driveway?

The length and width of a driveway will depend upon a variety of factors, including how many vehicles will be on the drive and how much space you want to allow between each vehicle. There is no “normal” width. We recommend a minimum of 10 feet width for a single drive, though 12 feet is preferable so car doors can be open and people can step out onto the drive. City ordinances may also stipulate minimum and maximum lengths and widths for driveways, so it’s best to check with your city before beginning installation.

How much is driveway grading

Costs for grading a driveway will vary depending on the size of the driveway and slope of the grade. Single-car driveways are usually about 12-feet wide, while a two-car driveway is about 16 to 24 feet wide. You also will need about 10 to 20 feet or more extra space for car turnaround when you are trying to determine the cost of a driveway grading project. The cost also will be affected by labor and materials, as well. Call 512-646-6069 when you are looking for an affordable, professional driveway grading service.

Driveway grade breaks

When grading a driveway, depending on the design, the slope may change. These driveway grade breaks will vary per the design and are also regulated by various city ordinances.

A Home With a Concrete Driveway.

Driveway grading contractors

While there are many driveway grading contractors in the area, if you want a team of reliable professionals, then we are the team to call. We have the expertise and experience to ensure your driveway is well built and drains properly once it is installed. We use the latest equipment and technology, as well as quality materials. We are also the repair experts to call when a drive grade fix is in order. 

So, if you are needing experts for grading a driveway in Austin, TX, give us a call at 512-646-6069.

What are the Causes of Pavement Distress?

Potholes are a sign of pavement distress.

What is distress in pavement?

Distress in pavement describes a wealth of problems in pavement from cracks to potholes and rutting. In other words,pavement distress consists of any sort of damage or failure that undermines the integrity of pavement, and keeps it from functioning properly. In general, two types of distress exist: environmental distress and structural distress.

Agents causing environmental pavement distress include exposure to direct sunlight, water, weathering and aging. Structural stressors include overloading, wet sub-grade or substandard design.

What are the general causes of pavement failure?

When you see cracks, potholes, depressions or ruts in asphalt, these are signs of distress and failure in your pavement. Here are just a few main causes of pavement failure.

Causes of pavement failure include:

  • Water: Water causes the paving material to deteriorate over time.
  • Stress from heavy vehicles: Traffic from vehicles too heavy for the pavement will eventually wear down the pavement.
  • Temperature fluctuations: As seasons and temperatures change, the pavement expands and contracts with the heat and cold.
  • Sun exposure: The sun not only causes pavement to fade, it dries it up and causes the material to deteriorate.

What causes cracks in pavement?

Pavement distress has numerous causes that create everything from cracks to bleeding. Cracks are among the most common problems seen in pavement. Cracks can be caused by any number of things from age to water eroding the paving material to the sun’s heat drying and deteriorating it. Additionally soil erosion, drought or long periods of heavy rain can cause the ground under the pavement to shift and crack. Cracks caused by ground movement are hard to prevent. Tree roots can also push up into pavement and crack it.

Moreover, heavy vehicles traveling on asphalt pavement not designed to support the extra weight can create cracks over time. Vehicles or other heavy objects like pallets left on the pavement for extended periods can cause the pavement to crack.

When you have cracks in your pavement, hot rubber is one of the most effective ways to seal the cracks. If you have cracks in your pavement inAustin, TX, ATX Asphalt Paving is the team to call for reliable hot rubber crack repair. Get help from us today by calling 512-646-6069.

What are active cracks?

An active crack is a type of crack found in concrete pavement. As opposed to dormant cracks, active cracks constantly change either their length, width or depth. Either kind of crack can allow water to intrude under the concrete, washout the base and cause the concrete to sink.

If you are concerned about water quality, even water that gets under your sidewalk, you may want to consider water filtration services.

How to avoid cracks in concrete pavement

Cracks in concrete pavement can be avoided as the concrete is mixed and poured. As it’s placed, a good way to avoid cracks is to make sure no extra water is added to the mix. When there is excess water in the mix, the water evaporates which will lead the concrete shrinking more.

Additionally, when preparing the sub-grade, make sure it is smooth and uniform, free of frost and has good drainage. Otherwise, if the sub-grade is poorly prepared, the concrete can settle and crack.

Properly curing the concrete is also important to keep it from cracking. When you cure concrete, you are preventing the concrete from losing moisture too quickly. Rapid moisture loss causes the concrete to shrink and crack.

In areas where concrete is likely to crack, contraction joints can be added. These strips of plastic or hardboard can be placed to prevent random cracking.

Types of cracks in concrete pavement

Some of the most common types of cracks you see in concrete include:

  • Plastic shrinkage: When it’s in its plastic state, before it’s hardened, water evaporates and causes the concrete to shrink. This shrinkage can result in cracks.
  • Expansion: When concrete heats up, it expands and pushes against whatever gets in its way, whether walls or other concrete slabs. If the object in the way isn’t flexible and doesn’t give way, cracking can occur.
  • Heaving: Cracking can be caused by the ground shifting underneath due to expansion and contraction from freezing and thawing. Similarly, tree roots can push up concrete and crack it.
  • Settling: If a void or hole opens below the concrete, the concrete can settle and crack.
  • Overloading: Excessive weight on the concrete can cause it to crack.
  • Premature drying: When moisture dries rapidly from concrete, it can create cracks.
Grass in pavement cracks can be an annoyance.

Grass in pavement cracks

Grass and weeds growing up through pavement cracks is a common annoyance and there are several possible solutions to getting rid of grass and weeds. Some natural ways to kill the grass or weeks include pouring boiling water on them until they stop growing and pouring a mixture of kitchen vinegar and salt over the weeds. Horticulture vinegar, which can be ordered online, will also do the trick. Other effective ways to get rid of grasses and weeds include torching them with a propane torch or sealing the crack.

Warping cracks in rigid pavement

Warping cracks are caused when concrete slabs expand in hot weather and poorly designed joints aren’t flexible enough to hold up to the stress of the expansion. When longitudinal and transverse joints are properly reinforced, warping cracks will usually be avoided.

Filling cracks in pavement

Filling a crack in the pavement is different from sealing it. When you fill a crack, you use an asphalt emulsion and place it non-working cracks such as alligator cracks, reducing the water infiltration and reinforcing adjacent pavement. Sealing a crack uses hot sealant to prevent water from intruding into cracks larger than 0.1 inches.

Call for service today

If you need cracks in your pavement filled or sealed in Austin, TX , contact the experts at ATX Asphalt Paving. Call 512-646-6069 for service.

How to Lay a Granite Driveway

A granite driveway is great for areas with low-average rainfall.

Have You Considered a Granite Driveway?

Probably not, but granite driveways not only are they an aesthetically pleasing option, but they are also a great investment. You can easily find a crushed granite driveway how to video on YouTube, but if you want quality service and products, then hiring an expert group is the way to go. ATX Paving in Austin, TX are the people that you want helping you create the home you want.

What is a granite driveway or pathway?

Granite driveways are quite different from the typical concrete or asphalt driveway. Typically, you’ll find granite driveways made of something called decomposed granite, also known as granite driveway chippings. This is just granite that has been crushed down into small, gravel like pieces. Decomposed gravel, or DG, is used for a variety of landscaping and paving purposes.

  • Loose DG, used in garden bedding will be the cheapest up front, but because it is more susceptible to erosion, it can cost more later on to maintain. Loose DG is great for drainage, which is why homeowners like to use it in gardens.
  • Decomposed granite mixed with a stabilizer, used for pathways and gardens, is a little more expensive up front. Unlike DG that is completely loose, stabilized DG will have a base of compact decomposed granite with a layer of loose DG on top. This allows for a certain amount of drainage without the decomposed granite becoming murky and muddy.
  • Decomposed granite mixed with a resin is most commonly used for driveways. It will be the most expensive up front. DG mixed with a resin is much more durable than DG loose or mixed with a stabilizer. This mixture, once paved, does commonly resemble an asphalt driveway. It resists erosion as well as cracking and breaking, like asphalt does over time.

Whether as a pathway or a driveway, choosing decomposed granite has many great benefits.  

Granite driveways offer an aesthetic appeal while also being low maintenance and durable.

Benefits of a Granite Driveway

  • Paved or with a stabilizer, there is minimal erosion
  • Incredibly permeable preventing flooding and muddiness
  • Durable
  • Cost friendly
  • Variety of colors makes this a very customizable option

Regardless of the aesthetic appeal, there are still a number of factors to consider when deciding on granite for driveways. If there are heavy rains in your area, then choosing loose DG or even DG with a stabilizer might not be the best option. While both are great for drainage, they are still susceptible to erosion and eventually with excessive rains, flooding. These are all things to discuss with a representative at ATX Paving in Austin, TX.

Our Process

If you have decided on a granite for your driveway, the next step is installation and that is where ATX Paving comes in. We have experienced pavers that can come in to quickly and efficiently install your new driveway.

What we will do is consult with you about the placement, type and color of the driveway. From there, we will mix everything and create the pathway the correct width and about 4-6 inches deep. For a driveway, the granite mixture is poured and paved, creating the durable and lasting agreed upon. Since any color can be added, you can even match your granite driveway or pathway to your exterior paint.

Once installed, your new decomposed granite driveway will last around 10-14 years. Even with heavy foot and car traffic, your driveway will not erode, crack or fade in color. It is recommended to have a fresh layer of granite laid about every 1-2 years from the time of installation.

If you’re now wondering how to care for your new driveway, you can also leave that to ATX Paving. We are experts in all that is granite driveways, so we’ll make sure that your driveway, pathway or sidewalk is taken care of with the utmost care.

Frequently Asked Questions

How to clean a granite driveway?

If you need to clean or maintain your granite driveway, ATX Paving has the equipment and training to properly clean your driveway with little to no erosion.

Does decomposed granite get hard?

If it has been compacted and paved, yes it will get hard. Otherwise, loose DG will not get hard when exposed to elements.

How long does decomposed granite last?

On its own, granite driveway chippings will not last long with heavy rains, foot and vehicle traffic. When the decomposed granite has been compacted with a stabilizer or resin, it can last up to 14 years.

How thick should a crushed granite driveway be?

4-6 inches deep, this provides a strong surface and prevents erosion.

How deep does decomposed granite need to be?

About 6 inches, for driveways.  

Call ATX Paving, 512-646-6069, for granite driveway questions in the Austin, TX area today. We are the expert pavers to help with your granite driveway needs.

How Do You Maintain a Driveway

There are many aspects of a home that need to be taken care of. While we think of the things we need to take care of in the inside of our homes like our plumbing, cleaning the house, and doing laundry, there are also things on the outside that need proper maintenance. One of those things is total driveway maintenance. But who is responsible for driveway maintenance? The person who is responsible for the maintenance is the homeowner. If you share a driveway with someone, then the responsibility lies with both people.  Driveways take quite a beating, as they are driven over every single day. When a driveway isn’t properly maintained, it can start to crack or split. This doesn’t look particularly attractive and can even mess with your car’s tired and make your home look less than aesthetically pleasing.

A Man Using a High Grade Pressure Washer To Wash His Driveway

Keep Your Driveway in Good Shape with Proper Maintenance.

The good news is, this can all be remedied with routine maintenance. Sure its another thing that you need to keep up with, but it is better than having to repair the driveway. Before you begin, you will need the right driveway maintenance equipment; this will include a powerwasher, driveway sealing, crack filler, patching compound, scrub brush, biodegradable cleaner, dishwashing detergent, and absorbent products. It’s important to note that driveways come in different kinds of materials such as asphalt, brick, concrete, and gravel. Each of them will have their own specific maintenance, but there are two bigs ones that apply to most types of driveways.

  • Cleaning: Every type of driveway is going to need to be cleaned in order to maintain its look. Depending on how permeable the material is, you will either need to use a power washer or a good ole fashion scrub brush with soap and water. The biggest things you will want to clean are oil stains. Some will be new and old, and with new ones, you can apply the absorbent product like cat litter, coffee grounds, or cornmeal to absorb the oil. Once it has been absorbed you can use soap and water, or a high grand cleaner, to remove the oil stain. With old oil stains, you will just need to scrub it every once in a while in an attempt to remove the stain. If you have gravel or brick driveways, removing grass and weeds is another thing you can do while cleaning.
  • Sealing: In order to avoid the dreaded cracks that can form in driveways, you will want to use driveway sealing. Asphalt and concrete are the driveways that need to be sealed and you can find sealing at home improvement stores. Ideally, you will want to seal your driveway after it is cleaned or has had cracks repaired. This is to ensure that it stays in good condition. You don’t have to reseal a driveway that often, only every couple of years.

Other things that you might consider for driveway maintenance and repair is sweeping, filling in cracks, and fixing potholes. If you are looking to prevent cracks and other things from happening to your driveway, the prevention actions you can take are not using sharp equipment around the driveway, not using any chemicals to remove ice and ensure that the driveway doesn’t get too wet.

How Can I Clean My Driveway Without a Pressure Washer?

A Man Uses a Hose To Wash Down His Driveway

You Can Use Other Tools Besides a Pressure Washer To Clean Your Driveway.

As a part of your driveway’s maintenance, you will want to give it a thorough washing. One of the most powerful tools you can use to give your driveway a deep cleaning is pressure washer. Many people don’t have a pressure washer, but want to be able to give their driveway a really good cleaning–so what do they do? You can still achieve a good cleaning without a pressure washer, you will just need to right tools and products. You can start by sweeping your driveway to get up the extra dirt and debris. When that is finished you can use a scrub brush, dishwashing detergent or dishwashing soap to remove any stains. If there are new stains, use kitty litter or other absorbent products to absorb the liquid before you scrub it. When you’ve scrubbed as much as you can, you can rinse your driveway off with a hose or take buckets of water and rinse the soap off.

Should I Seal My Asphalt Driveway?

An Up Close Picture of Damaged Asphalt Surface

Having an Asphalt Driveway Sealed Can Prevent Damages From Occurring.

Sealing driveways only really apply to asphalt and concrete driveways, but people with concrete driveways seem to do it more often. However, if you are wanting to avoid cracks and potholes in your asphalt driveway, you will want to consider sealing it. How often do you need to seal your driveway? For an asphalt driveway, a homeowner will only need to seal it every two to three years, which is great as it will give your driveway the protection that it needs. If there are already cracks and potholes on your asphalt driveway, you can still put a seal on it, it just will be a little bit harder.

If you aren’t comfortable adding sealing to a driveway that is already damaged, you can call a professional to assist you. They will have the tools and sealing needed to get the job done. Other questions that people will ask about sealing asphalt driveways are “How long before you can park on a sealed driveway?” and “How long do you have to stay off a newly sealed driveway?” It’s going to depend on what the temperature outside is like. If you are getting asphalt sealing during the summer, then you will need to wait two days before you can walk or park the car on the driveway; if you are getting asphalt sealing in the fall or winter, homeowners will need to wait 72 hours.

If you have had a leak detection that has ended up with your driveway being dug up, you can call the experts at ATX Asphalt Paving! We are able to provide professional driveway installation in Austin, TX so give us a call now at 512-646-6069!

How to Protect Your Commercial Parking Lot

A Newly Paved and Painted Commercial Parking Lot

Once You’re Parking Lot is Finished, You’ll Want to Have it Sealed Within a Year.

You’ve constructed a beautiful parking lot for your business. Now you have to maintain it. Unfortunately, there are a number of hazards that can ruin your lovely commercial parking lot, such as:

  • Dirt and Debris
  • Ultraviolet Radiation
  • Oils and Grease Stains
  • Plumbing Problems
  • and More

So what can be done to make sure your parking lot lasts for the long haul? Here’s a great place to start!

General Maintenance Tips

To kick things off, you’ll want to make sure that your lot is covered with a protective seal. This seal provides a number of benefits. First, it locks out car fluids from seeping into the asphalt. Next, it slows the natural wear down created by vehicles coming in and out each day. Perhaps most importantly, the sealant prevents ultraviolet radiation (from the sun) from fading and cracking your asphalt.

Next, you’ll want to make sure that your parking lot is regularly cleaned and swept. Fresh oil blotches and other stains are easier to remove than those baked into the ground. These can also interfere with future asphalt sealing. Keeping your lot swept and rid of trash is a good way to protect yourself against unwanted pests. Pressure washing is another perfect way to keep your parking lot looking fresh and clean.

Finally, keep an eye out for potential hazards that could threaten your asphalt. For instance, if your water main is spilling over on the pavement, you’ll want to quickly contact your local Texas commercial plumbing service to prevent accelerated cracking.

How Often Should You Seal Coat a Parking Lot?

After the first year, you should keep seal coating your parking lot every two years. If you take exceptional care of your parking lot during that time, you might be able to extend that to every three years. A fresh asphalt seal coat every 2-3 years will greatly extend the life of your parking lot and make maintenance a lot easier for you in the long run.

Schedule Your Asphalt Seal Coating Today!

Ready to get started on your commercial parking lot maintenance? Let’s get you set up with an asphalt seal coating from ATX Asphalt Paving; call 512-646-6069 to schedule your seal coating!