Can I Resurface My Asphalt Driveway?

Asphalt Pavement Being Resurfaced.

Can I resurface my asphalt driveway?

If you’ve noticed some cracks or other damage like holes to your driveway, you may be wondering how to repair them. While a few cracks can be repaired with crack sealant, if the cracking is extensive, however, asphalt resurfacing may be the best option. This is also a good option if there are low spots in the asphalt to prevent standing water and reduce flooding risks. What is asphalt resurfacing? This is a middle road between minor repairs and full replacement. With a resurfacing, the drive and foundations isn’t dug up. You may ask, “Can you pour new asphalt over old asphalt?” This is exactly what resurfacing is: new asphalt is poured over the old. If the driveway damage isn’t severe, this is an affordable option to replacement. 

When you have a cracked and damaged drive and need professionals for asphalt resurfacing in Austin, TX, the team to turn to is ATX Asphalt Paving. We provide a full range of residential and commercial paving options. Give us a call at 512-646-6069 and find out how we can help you or schedule a service.

Should I resurface or replace my asphalt driveway?

While a few cracks can be repaired easily, if your drive is extensively cracked, however, you will have to decide between asphalt resurfacing or replacement. There are many advantages of resurfacing over replacement as outlined below.

Asphalt resurfacing vs replacement

  • Resurfacing is less expensive than replacement.
  • Resurface when the drive is otherwise sound.
  • Resurfacing is great for small scale enhancement and repair.
  • Resurfacing evens out the surface improving safety for pedestrian traffic.
  • The existing asphalt must be a minimum thickness of 1 ½ inches to resurface
  • If the drive is older than 15 years, it’s probably better to replace it.
  • When the drive is no longer structurally sound no matter the age, replace it.
  • If cracks appear over more than ⅓ of the surface, replace it.
  • Asphalt resurfacing is not recommended over concrete.

Resurfacing an asphalt driveway is a fairly simple, inexpensive process. The additional layers of asphalt will repair cracks and fill in holes, and give your drive a great new appearance. It can be done as long as the base layer is still structurally sound. If it is not sound, the resurfacing can do more harm than good. Before resurfacing, all necessary repairs need to be made and debris should be removed. Risers may need to be placed around objects like manhole covers as compensation for the new height of the asphalt.

How long does an asphalt overlay last?

Asphalt overlay or asphalt resurfacing adds fresh layers of asphalt over your current drive. It’s used as a way to repair cracks and holes or to improve its appearance. It will also even out the surface. Uneven surfaces can affect pedestrian traffic and safety and decrease the risk of flooding in low lying areas. You can resurface drives or even whole parking lots. One of the advantages of resurfacing is that it will add about 10 to 15 years to your drive’s life. If you replace the drive, the typical lifespan for a new asphalt drive is 15 to 25 years.

How much does it cost to resurface blacktop?

The average cost of asphalt resurfacing ranges from $980 to $3,485, but estimates can range from $250 to $6,000. Costs will vary depending on the amount of damage to the asphalt. Minor repairs like repairing potholes or cracks can range from $100 to $300. A major repair can cost $3,000 or more. A 500-square foot area in general will cost about $1,000 to $1,300 to resurface.

Cracks and potholes need to be repaired as soon as possible as the damage can affect the drive’s overall structure. Other problems can occur like poor drainage. When repairs are made, professionals like those at ATX Asphalt Paving generally charge by the square foot. On average asphalt costs between $1 and $3 per square foot to fix a small crack, whereas a pothole will cost about $2 to $4 per square foot. 

Additional aspects that could affect the cost include the slope of the surface and the ease in which a truck can get access to the job site. Any grading will cost on average about $1.50 per square foot. If there are drains or manholes, they will to be treated and in some cases you may need to get permits from your city or county. Permit fees can run anywhere between $10 to $200 or more.

An Asphalt Drive Gets Resurfaced.

Asphalt resurfacing near me

Do you have a relatively new asphalt drive? If the surface has cracks or holes in it you may want to consider asphalt resurfacing in Austin, TX. ATX Asphalt Paving has the expert professionals to manage any paving service you need. We offer a full range of paving services. Find out how we can help or schedule an appointment by calling 512-646-6069.